Fold Tite Stacker

· Operates Manually

· No Electrical power needed

· Opens fully out side or inside building

· Can optionally be installed inside building

· Strong Wind Load resistance

· Multiple Locks Open as well as Closed

· Economical cost and freight

· Sealed against the weather—all Sides

· All Maintenance Free Components

· Exposed Verticals pre painted white Aluminum

· Hinges Stainless Steel

· Structural Girts Galvanized Steel Tubes

· Padlockable Locking System Supplied

· Walk Door, Window or Polycarbonate sheet options

The Newest Cool-Air Inc., Door System -- This door integrates advantages of the accordion folding door and the inside sliding door panel to create a tightly stacked open door with a stabilized starter panel hinged to the building column. This door can be installed to operate fully outside or fully inside the building. This manually operating door operates smoothly and can deal with many climates and weather conditions. This door is available in 2.5" standard system or 4.5" heavy duty system. The Newest door system from Cool-Air draws from the advantages of the ease of operation of the Horizontal Bi-Fold and the operating safety of the Multiple Narrow Panel Inside Slider.

The Fold-Tite Stacker starts with a truss like starter panel hinged to the building column for stability then uses a two narrow panel set system for smooth incremental operation with multiple locks for security.

The open door, if fully outside the building, can even be installed past the opening such as on an arch building. The increased number of panels offers increased strength but also increases the amount of the width necessary to store the open door. The amount of door extending away for the building compared to the Horizontal Bi-Fold is reduced substantially and is normally 40”. All of the available building clear opening height is usable, therefore there is no need to build a taller structure than necessary.