|
Non Powered Manually Operating Doors for General Aviation Sized Hangars And Industry |
|
The Newest door system from Cool-Air draws from the advantages of the ease of operation of the Horizontal Bi-Fold and the operating safety of the Multiple Narrow Panel Inside Slider. The Fold-Tite Stacker starts with a truss like starter panel hinged to the building column for stability then uses a two narrow panel set system for smooth incremental operation with multiple locks for security. The open door if fully outside the building and can even be installed past the opening such as on an arch building. The increased number of panels offer increased strength but also increases the amount of the width necessary to store the open door. The amount of door extending away for the building compared to the Horizontal Bi-Fold is reduced substantially and is normally 40”. All the available building clear opening height is usable—no need to build a taller structure than necessary. Chart below shows the stack space required per door size. |
|
· Operates Manually · No Electrical power needed · Opens fully out side building · Can optionally be installed inside building · Strong Wind Load resistance · Multiple Locks Open as well as Closed · Economical cost and freight · Sealed against the weather—all Sides · Tail Door function design possibilities · All Maintenance Free Components · Exposed Verticals pre painted white Aluminum · Hinges Stainless Steel · Structural Girts Galvanized Steel Tubes · Keyed Locking System Supplied · Walk Door, Window or Polycarbonate sheet options |
|
To contact us: |
|
Cool-Air, Inc. DBA Manual Hangar Doors Phone: 866-580-8980 Outside of the US 518-580-8980 Fax: 518-691-8347 Mail: PO BOX 2283, Malta, NY 12020 Shipping: 13 Stone Clover Dr., Saratoga Springs, NY 12866
|
|
Video Clip #1 Video Clip #2 (coming) |
