Non Powered Manually Operating Doors for General Aviation Sized Hangars And Industry

Expanded photo and video description of the Cool-Air Doors installed in typical applications.

This Inside Slider had a unique application. Needing to opening to one side without the hangar depth needed to store the full door. Consequently, The starter panels, one on each side, are hinged to the building column In Swing ! The door allows flexible design to meet many different applications.

Jim installed five Horizontal Bi-folds on an older door-less T hangar. The design is intended to compensate for building irregularities, New Construction or Retrofit.

As with the Horizontal Bi-Fold, this shows a number of our Inside Sliders. We are only showing the Narrow Panel design now in use and very easy to operate. The Safest Manually Operating Door on the market!

This album shows  doors from our start to current from all around the country. The door has changed as well as some of the components but the concept remains the same. Non powered yet easy to open.

This is a section of a copyrighted Video produced by Ed McCall of a standard door installed on a Hoover Post Frame building. Special pre planning care provided by the owner to include lock points for the  open door  on the poured concrete apron.

Bob Ungrin, CSA-2.5 Inside Slider, Smith Falls, Ontario, Canada

Horizontal Bi-Fold Photo Album  

Inside Slider Photo Album

Jim Landrum, CSA-5 HB Horizontal Bi-fold, Macon, Missouri

Norm Rischbeiter, CSA-5-HB Horizontal Bi-Fold, Graniteville, S. Carolina

Video Clips and Photos of Door Installations

This album shows a doors being assembled and installed all around the country. The door has changed as well as some of the components but the concept remains the same. Non powered yet easy to open.

Horizontal Bi-Fold Install Photos

Inside Slider Install Photos

This album shows a doors being assembled and installed by George Race in Albion, Michigan. The photos were taken and supplied by Mr. Race during his 2005 building project.

Adam Jones, The Erection Company CSA-4.5 BR Bottom Rolling “T” Hangar Anacortes, Washington

 

Adam installed  19 Bottom Rolling Sliders on an HCI Steel designed “T” Hangar expansion project. Each  door  is  made up of two large panels with an inset bottom roller system and it is easy rolling and secure; open, closed or moving.

Fred installed seven combination Large Hinged doors and Inside Sliders on a HCI Steel designed “T” Hangar each 42’ wide. Limited depth required the large hinged starter panels at each side of the opening.

Fred Kravetz, SR Construction CSA-4.5 HG/IS  Combination Door “T” Hangar, N. Las Vegas, NV

 

Lloyd Parker, SAV 2.5 IS Inside Slider, Independence, OR