|
Non Powered Manually Operating Doors for General Aviation Sized Hangars And Industry |
|
This Door Design moves the complete weight of the door to the Floor. No door weight is carried by the Building Structure. Only the weight of the top track is Building Supported. Solid Steel V-Groove Caster fit snuggly into the Aluminum Bottom Rail and Ride on a Floor Mounted Steel Angle to Control and guide the door open and Closed. Out-Riggers are required for doors sliding past the opening. Two, Three or Four Panel Systems with Single or Double Top Guide Track mounted to the Building Structure to secure the door. |
|
· Maintenance Free Pre Painted Aluminum verticals and galvanized steel tube girts · 16 gauge Square Top Guide Track in single or double run. · Heavy Duty 300 pound Capacity V-Groove Casters with Grease Zerk Fitting · Jamb and Center Latches Supplied · Optional Walk Door and Windows with Framed openings · Easy, Secure Operation even with the wind blowing · Aluminum Vertical is self trimming with “J” Trim to accept covering |
|
This is one of the most secure, Open, Closed or moving, manual door designs because each door panel is attached to the top and bottom guide system at each corner at all times. |
|
To contact us: |
|
Cool-Air, Inc. DBA Manual Hangar Doors Phone: 866-580-8980 Outside of the US 518-580-8980 Fax: 518-691-8347 Mail: PO BOX 2283, Malta, NY 12020 Shipping: 13 Stone Clover Dr., Saratoga Springs, NY 12866
|
